Twitter icon
Facebook icon
Google icon
LinkedIn icon

Visa meny

Produkter

Ismatec MCP Process

Fakta
0
Artikelnummer

ISM 915

manual_mcp_process.pdf
MCP Process

PC-programmerbar doseringspumppump med utbytbara pumphuvuden IP65-klassad avspolningspumpsystem

Beskrivning:

  • Programmerbar fyll och kalibreringsfunktion
  • Robust, stark drivenhet för lösa huvuden
  • Bajonett koppling för byte utan verktyg
  • Mer än 20 pumphuvuden att välja på
  • Analogt interface
  • IP 65

Teknisk data
1
Teknisk Data MCP Process
Flow rates < 0.001 – 3700 ml/min (depending on mounted pump-head)
Channels 1 – 24 (depending on mounted pump-head)
Operating panel - 7-button membrane key-pad
- LED display
Memory 4 sets of operating parameters can be stored
Programming
(similar to PLC) 		4 individual command sequences programmed in a PC can be stored in the pump. The user can run the programs using the pump as a stand-alone unit.
Operating modes

- pumping by drive speed (rpm)
- pumping by flow rate (ml/min)
- factory-set flow rates for all available tube sizes
- dispensing by volume (ml)
- dispensing by time (0.1s up to 999hrs)
- dispensing by volume within a pre-set time
- interval dispensing by volume with a pause
- interval dispensing by time with a pause
- setting the number of dispensing cycles
- pause time setting (from 0.1s up to 999hrs)
- roller back-steps for drip-free dispensing
- reversible rotation direction

Calibrating function - for flow rate (ml/min)
- for dispensing volume (ml)
Speed 1 – 240 rpm
Speed setting rpm, resolution 0.1 rpm
Speed control closed loop control for pressure independent speed
RS232 interfaces - RS232 "in" - for operation controlling via PC
- RS232 "out" - for cascading up to 8 pumps
Analog input Speed control (0–5 or 0–10V / 0–20 or 4–20mA)
Analog output Speed monitoring (0–10VDC or 0–7.2 kHz)
Digital input (TTL level) Start/Stop, rotation direction, autostart, 2 universal inputs
Digital output (PWM) 2 universal outputs
Differential pressure 1.5 bar (21.7 psi) possible (depending on pump-head and tubing material); small tubing diameters may allow higher pressures
Motor type DC motor
Power consumption 100 W
Power supply 100 – 230 VAC / 50 – 60 Hz
Protection rating IP 65
Depth / Width / Height 220 x 155 x 260 mm (8 2/3" x 6 1/10" x 10 ¼") (without pump-head)
Weight 6.9 kg (16 lb) (without pump-head)

Priser
1
Priser

Välkommen att kontakta oss för information om priser och övriga frågor. Fyll i formuläret, offertförfrågan, nedan så hör vi av oss inom kort. Du kan också kontakta oss via:

Telefon: +46 (0)31 748 17 80
Fax: +46 (0)31 748 17 85
Mail: info@labinett.se

Obs: Teknisk support ingår i våra priser

Relaterade Produkter
1
Fler Produkter

Fler relaterade produkter finner du här.

Visa meny

Labinett AB

Postadress:
Box 9007
400 91 Göteborg 		Besöksadress:
Datavägen 20
436 32 Askim 		Tel: 031 748 17 80
Fax: 031 748 17 85
Mail: info@labinett.se

© 2020 Labinett AB